Holden Equinox Owner Manual (Holden-Localizing-Holden-12561772) -
2019 - crc - 6/26/18
Vehicle Care
275
3. Remove the cover from the
back of the headlamp
assembly by turning it
anticlockwise.
4. Disconnect the electrical
connector.
5. Remove the bulb from the lamp
assembly by turning it
anticlockwise.
6. Install a new bulb in the lamp
assembly.
7. Connect the electrical
connector.
8. Replace the cover from the
back of the headlamp
assembly by turning it
clockwise.
9. If removed, reinstall the battery
cover or the air cleaner cover.
Front Turn Signal and
Fog Lamps
Driver Side Shown, Passenger
Side Similar
To replace one of these lamps:
1. Remove the fastener to remove
the access panel.
2. Access the lamp through the
hole in the under-body air
deflector.
3. Disconnect the electrical
connector from the bulb
assembly.
4. Turn the bulb socket
anticlockwise and pull the bulb
straight out of the socket.
5. Replace the bulb and reverse
Steps 1
–
4 to reinstall.
Taillamps
1. Turn Signal
2. Stop lamp/Tail lamp
To replace one of these lamps:
1. Open the liftgate. See
.
2. Remove the two screw covers
from the tail lamp assembly.