Holden Equinox Owner Manual (Holden-Localizing-Holden-12561772) -
2019 - crc - 6/26/18
58
Seats and Restraints
If equipped, the rear seat backs can
also be folded forward by pulling the
levers on the driver side of the rear
cargo area.
Raising the Seat Back
{
Warning
If either seatback is not locked, it
could move forward in a sudden
stop or crash. That could cause
injury to the person sitting there.
Always push and pull on the
seatbacks to be sure they are
locked.
{
Warning
A seat belt that is improperly
routed, not properly attached,
or twisted will not provide the
protection needed in a crash. The
person wearing the belt could be
seriously injured. After raising the
rear seat back, always check to
be sure that the seat belts are
properly routed and attached, and
are not twisted.
To raise a seat back:
1. Ensure the seat belt is in the
belt stowage clip.
2. Lift the seat back up and push
it rearward to lock it in place.
A tab near the seat back
handle retracts when the seat
back is locked in place.
3. Return the outboard head
restraints to the upright
position. If removed, reinstall
the centre head restraint. See
.
4. Push and pull the top of the
seat back to ensure it is locked
into position.
5. Repeat the steps to raise the
other seat back, if necessary.
When the seat is not in use, it
should be kept in the upright, locked
position.