Holden Equinox Owner Manual (Holden-Localizing-Holden-12561772) -
2019 - crc - 6/26/18
72
Seats and Restraints
Warning (Continued)
Where legally allowable, you may
install a forward-facing child
restraint in the front seat, but
always move the passenger seat
as far back as it will go.
Child restraint anchorages are
designed to withstand only those
loads imposed by correctly fitted
child restraints. Under no
circumstances are they to be
used for adult seat belts,
harnesses, or for attaching other
items or equipment to the vehicle.
Note
If unsure about installing a child
restraint anchor fitting, please
contact an approved restraint fitting
station or a Holden Dealer.
Top Tether Anchor
Fittings
Top tether anchors are located on
the back of the rear seat backs and
are identified with symbol
I
.
Do not attach anything other than a
child restraint system to the vehicle
top tether anchors.
Child Restraint
Installation Locations
The vehicle has been designed to
accommodate child restraints on the
rear seat.
When using a child restraint, read
the installation instructions supplied
with the child restraint and follow the
directions for fitting carefully.
Secure the child in the restraint in
accordance with the manufacturer's
instructions.
If unsure about installing a child
restraint anchor fitting, contact an
approved restraint fitting station or a
Holden Dealer.
Automatic Locking Retractor
(ALR) Seat Belts
ALR seat belts are provided at the
rear
outer
seating positions. Use
these in conjunction with a top tether
strap when a non-ISOFIX child seat
is being used.
Extend the seat belt fully and then
fit the belt around the applicable
locations on the child restraint and
fasten the buckle. Refer to the
installation instructions supplied with
the child restraint.
Allow the belt to retract. While the
belt is retracting, a clicking noise
can be heard which indicates the
