Holden Equinox Owner Manual (Holden-Localizing-Holden-12561772) -
2019 - crc - 6/26/18
Driving and Operating
211
to turn TCS off if the vehicle gets
stuck in sand, mud, ice, or snow.
See
“
Turning the Systems Off and
On
”
later in this section.
The indicator light for both systems
is in the instrument cluster. This
light will:
.
Flash when TCS is limiting
wheel spin.
.
Flash when ESC is activated.
.
Turn on and stay on when either
system is not working.
If either system fails to turn on or to
activate, a message displays in the
Driver Information Centre (DIC), and
d
comes on and stays on to
indicate that the system is inactive
and is not assisting the driver in
maintaining control. The vehicle is
safe to drive, but driving should be
adjusted accordingly.
If
d
comes on and stays on:
1. Stop the vehicle.
2. Turn the ignition off and wait
15 seconds.
3. Start the engine.
Drive the vehicle. If
d
comes on
and stays on, the vehicle may need
more time to diagnose the problem.
If the condition persists, see your
dealer.
Turning the Systems Off and
On (Mid-level DIC)
Caution
Do not repeatedly brake or
accelerate heavily when TCS is
off. The vehicle driveline could be
damaged.
At speeds of 56 km/h or above, the
ability to turn off or on is disabled.
TCS and ESC can be turned off or
on using the Driver Information
Centre (DIC) controls as follows:
Press
o
or
p
to select the DIC
c
(Vehicle) page, then use
w
or
x
to scroll through the items to
select Traction & Stability.
The current status (on or off) of the
TCS
t
and ESC
d
will be
displayed.
Press
V
to enter the Options menu.
Use
w
or
x
to scroll through the
available options then press
V
to
select.
