Holden Equinox Owner Manual (Holden-Localizing-Holden-12561772) -
2019 - crc - 6/26/18
In Brief
21
The vehicle has an automatic
transmission shift lock control
system. You must press the brake
pedal and then press the shift lever
button before shifting from P when
the ignition is on. See
Manual Transmission
Select reverse gear while the
vehicle is stationary.
1. Press the clutch pedal to the
floor.
2. Wait 3 seconds.
3. Left the ring on the shift lever.
4. Move the shift lever to
position
R
.
If the gear does not engage:
1. Return the shift lever to the
neutral position.
2. Release the clutch pedal.
3. Press the clutch pedal again
and repeat gear selection.
See
.
Parking
{
Warning
If the vehicle has a manual
transmission, never get out of the
vehicle without first moving the
shift lever into 1st or R (Reverse),
setting the parking brake and
turning the ignition off. The
vehicle can roll, which could
cause serious injury or death.
1. Apply the electric parking
brake.
2. Automatic transmission: Select
position
P
.
Manual transmission: If facing
uphill or on flat ground, select
1st gear. If facing downhill,
select reverse gear.
3. Close all windows.
4. Turn the ignition off and
remove the RKE transmitter
from the vehicle.
5. Lock the doors, liftgate and fuel
filler door by pressing
Q
on the
RKE transmitter, or the button
on a door handle while the
transmitter is within 1 m of the
handle.
See
Getting Started
Check Before Starting
.
Check the windows, mirrors and
lamps are clean.
.
Visually check tyre inflation.
Check the tyre pressures
each week.
