Holden Equinox Owner Manual (Holden-Localizing-Holden-12561772) -
2019 - crc - 6/26/18
212
Driving and Operating
.
If TCS is turned off, the
displayed status on the DIC will
change from On to Off and
i
will illuminate in the instrument
cluster.
.
If ESC is turned off, the
displayed status on the DIC of
ESC, and TCS if it was on, will
change from On to Off.
i
and
g
will illuminate in the instrument
cluster.
Turning the Systems Off and
On (Up-level DIC)
Caution
Do not repeatedly brake or
accelerate heavily when TCS is
off. The vehicle driveline could be
damaged.
At speeds of 56 km/h or above, this
ability to turn off or on is disabled.
TCS and ESC can be turned off or
on using the Driver Information
Centre (DIC) controls as follows:
Press
o
or
p
to access the DIC
8
(Options) page.
If required, use
w
or
x
to scroll
through to Traction & Stability.
Press
V
to select. The current
status (on or off) of the TCS
t
and
ESC
d
will be displayed.
Press
V
to open a menu to enable
the settings to be changed.
Use
w
or
x
to scroll through the
available options then press
V
to
select.
.
If TCS is turned off, the
displayed status on the DIC will
change from On to Off and
i
will illuminate in the instrument
cluster.
.
If ESC is turned off, the
displayed status on the DIC of
ESC, and TCS if it was on, will
change from On to Off.
i
and
g
will illuminate in the instrument
cluster.
Hill Descent
Control (HDC)
HDC can be used when driving
downhill. It sets and maintains
vehicle speed while descending a
very steep incline in a forward or
reverse gear.
The HDC switch is on the centre
console.
Press
5
to enable or disable HDC.
Vehicle speed must be below
50 km/h.
