Holden Equinox Owner Manual (Holden-Localizing-Holden-12561772) -
2019 - crc - 6/26/18
Driving and Operating
225
An illuminated LED in the parking
assist button
X
indicates that the
system is ready to operate.
If
X
is switched off within an
ignition cycle, the front parking
assist is deactivated. If vehicle
speed has exceeded 25 km/h
beforehand, parking assist will be
reactivated when speed drops
below 8 km/h.
When the system is deactivated, the
LED in the button extinguishes and
Park Assist Off pops-up in the
Driver Information Centre (DIC).
Indication
The system warns the driver with
acoustic signals or, if equipped and
enabled, may pulse the driver's seat
when potentially hazardous objects
are detected:
.
In front of the vehicle at a
distance range of up to 1.2 m
and behind the vehicle at a
distance range up to 50 cm
while a forward gear is engaged
.
Behind the vehicle at a distance
range up to 1.5 metres while
reverse gear is engaged.
The acoustic warning signals may
sound in the vehicle on the side
closer to the object. Acoustic signals
are of a higher pitch for the front
than for the rear.
The interval between acoustic
signals decreases as the vehicle
moves closer to the object. When
the distance is less than
approximately 30 cm, the signal
becomes continuous. If equipped,
the driver's seat will pulse five
times.
Additionally, the distance to rear and
front obstacles is displayed by
changing distance lines in the DIC.
The distance indication can be
inhibited by vehicle messages with
a higher priority. After dismissing the
message, distance indication
appears again.
Deactivation
The rear parking assist
automatically switches off when
reverse gear is disengaged. The
front parking assist is deactivated
automatically at a speed
above 8 km/h.
Manual deactivation is also possible
by pressing the parking assist
button
X
on the centre console.
When the system is deactivated
manually, the LED in the button
extinguishes and Park Assist Off
pops-up in the DIC.
After a manual deactivation, the
front-rear parking assist is activated
again if
X
is pressed or if reverse
gear is engaged.
