Holden Equinox Owner Manual (Holden-Localizing-Holden-12561772) -
2019 - crc - 6/26/18
Driving and Operating
215
The cruise control indicator on the
instrument cluster turns green after
cruise control has been set to the
desired speed. See
.
Resuming a Set Speed
If the cruise control is set at a
desired speed and the brakes are
applied or
*
is pressed, the cruise
control is disengaged without
erasing the set speed from memory.
Once the vehicle speed reaches
about 40 km/h or more, briefly press
+RES. The vehicle returns to the
previous set speed.
Increasing Speed While Using
Cruise Control
If the cruise control system is
already activated:
.
Press and hold +RES on the
steering wheel until the vehicle
accelerates to the desired
speed, then release it.
.
To increase the speed in small
increments, briefly press +RES.
For each press, the vehicle goes
about 1 km/h faster.
Reducing Speed While Using
Cruise Control
If the cruise control system is
already activated:
.
Press and hold -SET until the
desired lower speed is reached,
then release it.
.
To slow down in small
increments, briefly press -SET.
For each press, the vehicle goes
about 1 km/h slower.
Ending Cruise Control
There are five ways to end cruise
control:
.
Press the brake pedal lightly.
.
Press
*
.
.
Shift the transmission to
N (Neutral).
.
Turn off cruise control, press
5
.
.
If equipped with a manual
transmission, press the clutch
pedal for several seconds.
Erasing Speed Memory
The cruise control set speed is
erased from memory if
5
is pressed
or if the ignition is turned off.