Holden Equinox Owner Manual (Holden-Localizing-Holden-12561772) -
2019 - crc - 6/26/18
Vehicle Care
299
Locate the notch on the sheet
metal weld flange. Place the
centre of the jack lift head on
the centre of the sheet metal
notch.
The jack must not be used in
any other position.
10. Attach the wheel wrench to
the jack.
11. Raise the vehicle by turning the
wheel wrench clockwise. Raise
the vehicle far enough off the
ground so there is enough
room for the tyre to clear the
ground.
12. Remove all of the wheel nuts.
13. Remove the flat tyre.
14. Remove any corrosion or dirt
from the wheel bolts, mounting
surfaces, and spare wheel.
15. Place the compact spare tyre
on the wheel-mounting surface.
16. Reinstall the wheel nuts.
Tighten each nut by hand until
the wheel is held against
the hub.
17. Partially lower the vehicle by
turning the jack handle
anticlockwise.
18. Tighten the wheel nuts firmly in
a criss-cross sequence, as
shown.