Holden Equinox Owner Manual (Holden-Localizing-Holden-12561772) -
2019 - crc - 6/26/18
266
Vehicle Care
Caution
If the air cleaner/filter is off, dirt
can easily get into the engine,
which could damage it. Always
have the air cleaner/filter in place
when driving.
Removal
Note
2.0L petrol engine shown; other
engines are similar.
1. Open the bonnet. See
2. Remove the four screws (1).
3. Loosen the screw on the air
duct clamp (2) and remove the
air duct hose from the cover.
4. Remove the air cleaner/filter
cover, keeping the wiring
harness electrical connector (3)
connected to the sensor.
5. Pull straight up on the cover,
and while holding the cover,
remove the air cleaner/filter.
6. Inspect or replace the air
cleaner/filter.
Installation
1. Align the air cleaner/filter with
the indicated point on the base
of the air cleaner/filter housing
and install the air cleaner/filter.
The outer air cleaner/filter seal
must be fitted properly in the
air cleaner/filter housing.
2. Align the air cleaner/filter
housing cover tabs to the air
cleaner/filter housing.
3. Install the air cleaner/filter
housing cover using the four
screws.
4. Slide the air duct onto the
cover assembly and tighten the
screw on the air duct clamp.
5. Verify the wiring harness
connector is fully connected to
the sensor on the air cleaner/
filter housing.
Engine Coolant
The cooling system allows the
engine to maintain the correct
operating temperature.