Holden Equinox Owner Manual (Holden-Localizing-Holden-12561772) -
2019 - crc - 6/26/18
300
Vehicle Care
19. Lower the jack all the way and
remove the jack from under the
vehicle.
20. Tighten the wheel nuts as tight
as possible with the wheel
wrench.
{
Warning
As soon as possible after
changing a wheel, have the wheel
nuts tightened with a torque
wrench to 140
Y
(Newton
metres).
Wheel nuts must be tightened
evenly to the correct torque in the
sequence shown, as wheel nuts
which have not been tightened
properly could eventually allow
the wheel to come off while the
vehicle is moving.
Storing a Flat Tyre
{
Warning
Storing a jack, a tyre, or other
equipment in the passenger
compartment of the vehicle could
cause injury. In a sudden stop or
collision, loose equipment could
strike someone. Store all these in
the proper place.
To store the flat tyre:
1. Return the jack and tools to
their original storage location,
except for the strap.
2. Replace the load floor.
3. Place the flat tyre, lying flat, in
the rear storage compartment.
4. Route the loop end of the strap
through one of the cargo
tie-downs in the rear of the
vehicle.
Then route the hook through
the loop and pull the strap to
tighten it around the cargo
tie-down.
5. Route the hook end of the
strap through the wheel.
6. Attach one end of the strap to
a cargo tie-down in the rear of
the vehicle.
