Holden Equinox Owner Manual (Holden-Localizing-Holden-12561772) -
2019 - crc - 6/26/18
Vehicle Care
295
6. Slot on Top of Compressor
7. Pressure Deflation Button
8. Pressure Gauge
9. Power Plug
10. Air Only Hose
If a tyre goes flat, avoid further tyre
and wheel damage by driving slowly
to a level place. Turn on the hazard
warning flashers. See
See
for
other important safety warnings.
1. Remove the compressor from
its storage location. See
Storing the Tyre Sealant and
Compressor Kit
.
2. Remove the air only hose (10)
and the power plug (9) from the
bottom of the compressor.
3. Place the compressor on the
ground near the flat tyre.
Make sure the tyre valve stem
is positioned close to the
ground so the hose will
reach it.
4. Remove the valve stem cap
from the flat tyre by turning it
anticlockwise.
5. Attach the air only hose (10) to
the tyre valve stem by turning it
clockwise until tight.
6. Plug the power plug (9) into the
accessory power outlet in the
vehicle. Unplug all items from
other accessory power outlets.
See
If the vehicle has an accessory
power outlet, do not use the
cigarette lighter.
If the vehicle only has a
cigarette lighter, use the
cigarette lighter.
Do not pinch the power plug
cord in the door or window.
7. Start the vehicle. The vehicle
must be running while using
the air compressor.
8. Press the on/off button (5) to
turn the tyre sealant and
compressor kit on.
The compressor will inflate the
tyre with air only.
9. Inflate the tyre to the
recommended inflation
pressure using the pressure
gauge (8). The recommended
inflation pressure can be found
on the Tyre and Loading
Information label. See
.
The pressure gauge (8) may
read higher than the actual tyre
pressure while the compressor
is on. Turn the compressor off
to get an accurate pressure