Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -
2017 - crc - 6/29/16
Driving and Operating
211
3. Turn the ignition key to
ON
.
4.
Engage reverse.
5. When the reverse gear is
engaged:
.
If there is no acoustic
signal: Check the power
supply of the kit module, by
verifying that the reverse
lights are working.
.
If just one acoustic signal is
given followed shortly after
by an almost continuous
acoustic signal, it indicates
a fault sign: Seek the
assistance of a Holden
dealer.
.
If one acoustic signal is
given followed by separate
acoustic signals like when
the vehicle gets closer to an
object: Seek the assistance
of a Holden dealer.
.
If two acoustic signals are
given:
Seek the assistance of a
Holden dealer.
Rear Cross Traffic Alert (RCTA)
If equipped, RCTA displays a red
warning triangle with a left or right
pointing arrow on the RVC screen to
warn of traffic coming from the left
or right. This system detects objects
coming from up to 20 m from the left
or right side of the vehicle. When an
object is detected, three beeps
sound from the left or right.
The system works in reverse gear.
The system range varies
accordingly to the type of parking
space vacancy, e.g. 45º.
Use caution while backing up when
towing a trailer, as the RCTA
detection zones that extend out
from the back of the vehicle do not
move further back when a trailer is
towed.
Note
RCTA may not operate when the
RCTA sensors in the left or right
corners of the rear bumper are
covered with mud, dirt, snow, ice,
or slush, or in heavy rainstorms.
{
Danger
RCTA may not provide a warning
with enough time to help avoid a
crash. It also may not provide any
warning at all.
Turning the Features On or Off
The
X
button of the instrument
panel is used to turn on or off the
Front and Rear Parking Assist. The
indicator LED next to the button
comes on when the features are on
and turns off when the features
have been disabled.
