Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -
2017 - crc - 6/29/16
Infotainment System
129
The access commands for playlists,
artists, and genres are prohibited
after the number of this type of
media exceeds 4,000.
The system will provide feedback
the first time voice recognition is
initiated if it has become apparent
that any of these limits are reached
during a device initializing process.
Voice Recognition for
Navigation
“
Navigation
”
:
Begin a dialog to
enter specific destination
information.
“
Navigation Commands
”
:
Begin a
dialog to enter specific destination
information.
“
Destination Address
”
:
Begin a
dialog to enter a specific destination
address, which includes the entire
address consisting of the house
number, street name, and city and
state.
“
Destination Intersection
”
:
Begin
a dialog to enter a specific
destination intersection.
“
Destination Place of Interest
”
:
Begin a dialog to enter a destination
Place of Interest category or major
brand name (if equipped).
Not all brand names of businesses
are available for voice entry. Most
major chains, such as chains with
more than 20 locations, should be
available to search for by name, but
the name must be precisely spoken.
Nicknames or short names for the
businesses will not likely be found.
Lesser known businesses might
have to be located by category,
such as fast food, hotels, or banks.
“
Destination Contact
”
:
Begin a
dialog to enter a specific destination
contact name.
“
Cancel Route
”
:
End route
guidance.
Voice Recognition for the
Phone
“
Call <contact name>
”
:
Initiate a
call to an entered contact. The
command may include location if
the contact has location numbers
stored.
“
Call <contact name> At Home,
”
“
At Work,
” “
On Mobile,
”
or
“
On
Other
”
:
Initiate a call to an entered
contact and location at home, at
work, on mobile device, or on
another phone.
“
Call <phone number>
”
:
Initiate a
call to a standard phone number
seven or 10 digits in length.
“
Pair Phone
”
:
Begin the Bluetooth
pairing process. Follow instructions
on the radio display.
“
Switch Phone
”
:
Select a different
phone for outgoing calls.
“
Voice Keypad
”
:
Begins a dialog
to enter special numbers like
international numbers. The numbers
can be entered in groups of digits
with each group of digits being
repeated back by the system. If the
group of digits is not correct, the
command
“
Delete
”
will remove the
last group of digits and allow them
to be re-entered. Once the entire
number has been entered, the
command
“
Call
”
will start dialing the
number.
