HOLDEN Colorado MY17 RG Owner'S Manual Download Page 5

Page: 5 / 298

Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -

2017 - crc - 6/29/16

Introduction

Your vehicle is a designed
combination of advanced
technology, safety, environmental
friendliness and economy.

This Owner's

Manual

provides

you with all the necessary
information to enable you to drive
your vehicle safely and efficiently.

Make sure your passengers are
aware of the possible risk of
accident and injury which may result
from improper use of the vehicle.

Using this Manual

This manual describes all
options and features available
for this model.

Certain

descriptions, including those
for display and menu
functions, may not apply to
your vehicle due to model
variant, special equipment or
accessories.

The "In brief" section will give
you an initial overview.

The table of contents at the
beginning of this manual and
within each section shows where
the information is located.

The index will enable you to
search for specific information.

Directional data, e.g. left or right,
or front or back, always relate to
the direction of travel.

Display messages and interior
labelling are written in bold
letters.

For a complete list of the
registered trademarks contained
in this manual see Trademarks
and License Agreements.

Trademarks and Licence
Agreements

142

Trademarks

and Licence Agreements

175

and

Trademarks and Licence

Agreements

279

Danger, Warning, and
Caution

{

Danger

Text marked

{

Danger

provides

information on risk of fatal injury.
Disregarding this information may
endanger life.

{

Warning

Text marked

{

Warning

provides information on risk of
accident or injury. Disregarding
this information may lead to injury.

Caution

Text marked

Caution

provides

information on possible damage
to the vehicle. Disregarding this
information may lead to vehicle
damage.

Summary of Contents for Colorado MY17 RG











































































































































































































































































































Search results

Summary of Contents for Colorado MY17 RG

Reviews:

Related manuals for Colorado MY17 RG

Brands by name

Popular brands

HOLDEN Colorado MY17 RG, Owner'S Manual

Search results

Summary of Contents for Colorado MY17 RG

Reviews:

Related manuals for Colorado MY17 RG

Brands by name

Popular brands