HOLDEN Colorado MY17 RG, Owner'S Manual

Page: 134 / 298

Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -
2017 - crc - 6/29/16
132 Infotainment System
.
If multiple paired cell phones are
within range of the system, the
system connects to the paired
cell phone in the order that they
were last used in the system. To
link to a different paired phone,
see
“ Linking to a Different
Phone ” later in this section.
Pairing a Phone
1. Touch the Phone screen
button.
2. Select Phone and select Pair
Device.
3. A four-digit Personal
Identification Number (PIN)
appears on the display. The
PIN, if required, may be used
in Step 5.
4. Start the pairing process on the
mobile phone to be paired to
the vehicle. See the cell phone
manufacturer's user guide for
information on this process.
5. Locate “ MyLink ” on the phone's
display. Follow the instructions
on the cell phone to enter the
PIN provided in Step 3 or
confirm the six-digit code
shown on the display. After the
PIN is successfully entered or
the code is confirmed, the
system responds with
“ <Device
name> has been successfully
paired
” when the pairing
process is complete.
6. If “ MyLink ” does not appear,
turn the phone off or remove
the phone battery and retry.
7. If the phone prompts to accept
connection or allow phone
book download, select always
accept and allow. The phone
book may not be available if
not accepted.
8. Repeat Steps 1 − 7 to pair
additional phones.
Listing All Paired and Connected
Phones
1. Touch the Phone screen
button.
2. Select Phones.
Disconnecting a Connected Phone
1. Touch the Phone screen
button.
2. Select Phones.
3. Touch the
z
next to the phone
to disconnect and follow the on
screen prompts.
Deleting a Paired Phone
Only disconnected phones can be
deleted.
1. Touch the Phone screen
button.
2. Select Phones.
3. Touch the
M
next to the phone
to delete and follow the on
screen prompts.
Linking to a Different Phone
To link to a different phone, the new
phone must be in the vehicle and
paired to the Bluetooth system.
1. Touch the Phone screen
button.
2. Select Phones.
3. Select the new phone to link to
from the not connected
device list.