HOLDEN Colorado MY17 RG Owner'S Manual Download Page 97

Page: 97 / 298

Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -

2017 - crc - 6/29/16

Lighting

Slide the switch:

OFF :

Remains off when doors are

opened or closed.

DOOR :

Automatically switches on

when a door is opened and turns off
after doors are closed.

ON :

Remains on when doors are

opened or closed.

Note

To prevent the battery from
discharging, turn the lamp off when
the engine is not running.

{

Warning

Do not leave the courtesy lamp
on while driving in the dark.

Reading Lamps

The reading lamps are located
between the sun visors.

1. Press the light area to turn a

lamp on.

The passenger

’

s or driver

’

front lamp illuminates.

2. Press again to turn the

lamp off.

Sun Visor Lamps

Illuminates when the vanity mirror
cover is opened, see

Sun

Visors

Summary of Contents for Colorado MY17 RG











































































































































































































































































































Search results

Summary of Contents for Colorado MY17 RG

Reviews:

Related manuals for Colorado MY17 RG

Brands by name

Popular brands

HOLDEN Colorado MY17 RG, Owner'S Manual

Search results

Summary of Contents for Colorado MY17 RG

Reviews:

Related manuals for Colorado MY17 RG

Brands by name

Popular brands