Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -
2017 - crc - 6/29/16
50
Seats and Restraints
{
Warning
This manual provides you with
general information concerning
child restraints only.
The driver is required by law to
ensure that passengers are
suitably restrained. In most States
and Territories of Australia and
New Zealand, specific laws may
exist which require children to be
seated in approved child
restraints and/or in certain
locations within the vehicle.
(Continued)
Warning (Continued)
Holden strongly recommends that
you refer to your specific State or
Territory regulations to determine
which child restraint and seat
location is suitable for your child.
{
Warning
Always ensure that the seat belt
fits firmly around the child
restraint, as applicable to the type
of restraint used.
If a child cannot see out of the
window, do not raise him/her by
means of an ordinary cushion.
It will not stay in place in a
collision and the child can slip out
of the straps and become
entangled.
Child Restraint Seat Belt
Locking Feature
The second row seat belts have a
child restraint locking feature.
When engaged, this feature
prevents the seat belt from being
loosened without releasing the
buckle.
To engage:
1. Clip the metal tongue into the
buckle.
2. Pull the shoulder belt all the
way out of the retractor to set
the lock. When the retractor
lock is set, the belt can be
tightened but not pulled out of
the retractor.
3. To tighten the belt around the
installed child seat, push down
on the child restraint, pull the
shoulder portion of the belt to
tighten the lap portion of the
belt and feed the shoulder belt
back into the retractor.
4. Try to pull the belt out of the
retractor to make sure the
retractor is locked. If the
retractor is not locked, repeat
Steps 2 to 4.
5. To remove, press the release
button on the buckle and allow
the belt to fully retract.
