Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -
2017 - crc - 6/29/16
Vehicle Care
241
2. Remove the tail light assembly
by pulling straight out of the
body. Remove the electrical
connector.
3. Turn signal light (1)
Tail light/brake light (2)
For LED version just replace
lights (1). The tail light/brake
light should be replaced by a
Holden dealer.
4. Rotate the relevant bulb holder
counterclockwise.
5. Remove bulb holder. Push the
bulb into the socket slightly,
rotate counterclockwise and
remove the bulb.
6. Insert the bulb into the bulb
holder. Insert the bulb holder
into the tail light assembly,
connect the electrical
connector and fit it into place.
Install tail light assembly in
body and tighten the screws.
Close the covers and engage.
7. Switch on the ignition, operate
and check all lights.
Liftgate Tail Lights
1. Open the liftgate.