HOLDEN Colorado MY17 RG Owner'S Manual Download Page 90

Page: 90 / 298

Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -

2017 - crc - 6/29/16

Instruments and Controls

Vehicle
Personalisation

The settings can be personalised in
the Driver Information Centre (DIC)
and in the Vehicle settings menu in
the Infotainment system.

For settings available in the
Infotainment System, see

Settings

138

Note

Depending on the vehicle variant,
some of the following functions may
not be available.

, 154

Settings in the DIC

1. Press

MENU

until

Vehicle

Information Menu

displayed.

2. Rotate the adjuster wheel to

scroll through the following
menu items:

Speed warning

Remaining oil life

Battery voltage

3. To close or to return to the

previous page, press

MENU

Speed Warning

The speed warning allows a
warning signal to be set, at a
chosen speed.

To set the speed warning:

1. Press

SET/CLR

2. Rotate the adjuster wheel to

select

3. Press

SET/CLR

4. Rotate the adjuster wheel to

select a speed.

5. Press

SET/CLR

to confirm.

Remaining Oil Life

Displays the estimate of the oil's
remaining useful life.

If Remaining Oil Life 99% is
displayed, that means 99% of
the current oil life remains.

When the remaining oil life is
low, the Change Engine Oil
Soon message will appear on
the display. The oil should be
changed as soon as possible.

See Engine Oil Life System
under

Service Information

270

The oil life display must be reset
after each oil change. Be careful
not to reset the oil life display at
any other time. It cannot be
reset accurately until the next oil
change.

How to reset the Remaining Oil Life:

1. Turn the ignition on with the

engine not running.

2. Press the

MENU

button on the

turn signal lever and rotate the
adjuster wheel to select the
Remaining Oil Life display.

Summary of Contents for Colorado MY17 RG











































































































































































































































































































Search results

Summary of Contents for Colorado MY17 RG

Reviews:

Related manuals for Colorado MY17 RG

Brands by name

Popular brands

HOLDEN Colorado MY17 RG, Owner'S Manual

Search results

Summary of Contents for Colorado MY17 RG

Reviews:

Related manuals for Colorado MY17 RG

Brands by name

Popular brands