HOLDEN Colorado MY17 RG Owner'S Manual Download Page 138

Page: 138 / 298

Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -

2017 - crc - 6/29/16

136

Infotainment System

Using the

“

Voice Keypad

”

Command

1. Press

. The system responds

“

Command Please,

”

followed

by a tone.

2. After the tone, say

“

Voice

Keypad.

”

The system allows

entry of special numbers and
characters.

Using the

“

Voice Mail

”

Command

1. Press

. The system responds

“

Command Please,

”

followed

by a tone.

2. After the tone, say

“

Voice Mail.

”

The system dials the voice mail
number of the connected
phone.

Clearing the System

Unless information is deleted out of
the vehicle Bluetooth system, it will
be retained. This includes phone
pairing information. For directions
on how to delete this information,
see

“

Deleting a Paired Phone.

”

Text Messaging

If equipped, the infotainment system
may allow text messages to be
received and replied to. Received
messages can also be read aloud.

Before using the text messaging
feature, check to see if the phone is
compatible.

See your dealer for details.

Text Menu

Inbox :

Touch to display incoming

messages. To view a message,
press on the name of the sender.
Press

to listen to the text

message. Press BACK on the
faceplate or press the Back screen
button to go back to the
previous menu.

Settings :

See

“

Text Settings

”

later

in this section.

Reply :

Touch to reply using a

predefined text message. See

“

Text

Settings.

”

Call :

Touch to place a call to the

sender of the text message.

Note

There may be previous
configuration required in your
mobile to have this function
working properly.

Due to the variety of devices and
their firmware versions, your
device may respond differently
when performing this function.

Any inquiries regrading your
phone functionality, refer to the
device manual.

Viewing a Text Message

While viewing a text message:

Touch Reply to reply using a
predefined text message.

Touch Call to place a call to the
sender of the text message.

Viewing Sender Information

If equipped, touch the name of the
sender to view sender information if
this information matches contact
information already stored.

Summary of Contents for Colorado MY17 RG











































































































































































































































































































Search results

Summary of Contents for Colorado MY17 RG

Reviews:

Related manuals for Colorado MY17 RG

Brands by name

Popular brands

HOLDEN Colorado MY17 RG, Owner'S Manual

Search results

Summary of Contents for Colorado MY17 RG

Reviews:

Related manuals for Colorado MY17 RG

Brands by name

Popular brands