HOLDEN Colorado MY17 RG Owner'S Manual Download Page 156

Page: 156 / 298

Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -

2017 - crc - 6/29/16

154

Infotainment System

Operation

Radio Controls

The infotainment system is operated
by using the pushbuttons, menus
shown on the display, and steering
wheel controls.

Turning the System On or Off

Press to turn the radio on.

Press and hold to turn the radio off.

Automatic Switch-Off

If the infotainment system has been
turned on after the ignition is turned
off, the system will turn off
automatically after 10 minutes.

If the ignition is turned off and the
user opens the driver door of the
vehicle, the system is turned off
automatically.

Volume Control

Turn to increase or decrease.

Press when the system is on to
mute and unmute the system.

Note

When changing the audio source, a
difference in volume may be
experienced.

Settings

Auto Volume

This feature automatically adjusts
the radio volume to compensate for
road and wind noise.

The level of volume compensation
can be selected, or the feature can
be turned off.

1. Press

{

, then touch Settings.

2. TouchRadio.

3. Select Auto Volume.

4. Select the desired setting.

5. Touch

to go back to the

source screen.

Tone Settings

1. Press

{

, then touch Settings.

2. TouchRadio.

3. TouchTone Settings.

4. Select a Preset tone setting or

a Custom tone setting and the
Fader/Balance:

Preset

Talk, Rock, Jazz, Pop,
Country, Classical,
or Custom.

Custom

Bass, Midrange, or Treble:
Touch

−

or +.

Fader or Balance

Adjust the front/rear or left/
right speakers by dragging
the dot in the vehicle image
on the screen.

5. Touch

to go back to the

source screen.

Setting the 12/24 Hour Format

1. Press

{

, then touch Settings.

2. Touch Time and Date, then

select 12h or 24h format.

3. Touch

Summary of Contents for Colorado MY17 RG











































































































































































































































































































Search results

Summary of Contents for Colorado MY17 RG

Reviews:

Related manuals for Colorado MY17 RG

Brands by name

Popular brands

HOLDEN Colorado MY17 RG, Owner'S Manual

Search results

Summary of Contents for Colorado MY17 RG

Reviews:

Related manuals for Colorado MY17 RG

Brands by name

Popular brands