9
Wire the Inverter Input to a Supply
In this step, you will connect wiring to the input of the inverter. This Inverter is single-phase
power only. The power connection terminals are
[L1] and [N]. So you must refer to the
specifications label (on the side of the inverter) for the acceptable power source
types!
Single-phase inverter models will have no connection to the [S/L2] terminal.
This is only used for three-phase models.
Note the use of ring lug connectors
is
recommended
for a secure connection.
Single-phase 100V 0.4kW
Single-phase 100V 0.75kW
NOTE
: An inverter powered by a portable power generator may
cause
a distorted power
waveform, overheating the generator. In general, the generator capacity should be five
times that of the inverter (kVA).
Chassis Ground (M4)
Chassis Ground (M4)
Single-phase
L1
Power input
Output to Motor
N U/T1 V/T2 W/T3
RB
P/+
-
Single-phase
Power input
Output to Motor
L1
N U/T1 V/T2 W/T3
RB
P/+
－
