3.
Move the current directory to the folder where the tool is available. (For example:
<
SVP-root-directory
>\DKC200\mp\pc)
.
4.
Specify the output destination of the dump
file
and execute
Dump_Detail.bat
or
Dump_Normal.bat
.
For example, if you are storing the result of
Dump_Detail.bat
to
C:
\Result_832000400001
, enter the following:
C:\MAPP\wk\832000400001\DKC200\mp\pc>Dump_Detail.bat C:
\Result_832000400001
Note:
■
A space is required between
Dump_Detail.bat
and
C:\Result
.
■
The dump
file
name is
hdcp.tgz
. To manage dump
files
by storage
systems, we recommend adding a serial number to the output folder
name. For example, if the serial number is 832000400001, the folder
name should be
C:\Result_832000400001
.
■
When the tool is being executed, is displayed in the command
prompt. When the execution is completed, is displayed.
"Executing..."
"zSv_AutoDump.exe is completed."
5.
A completion message box displays. Press any key to acknowledge the message and
close the message box.
hdcp.tgz
: This is the dump
file.
Give this
file
to the maintenance personnel. If you
save too many dump
files
in the SVP storage, space might not be available.
Therefore, move the dump
file
outside of SVP storage.
zSv_AutoDump.log
: This is the log
file
of the dump tool. If the dump
file
is not
output, give this log
file
to the maintenance personnel. If the dump
file
is output,
delete the log
file.
6.
Close the Windows command prompt.
Chapter 9: Managing storage system reports
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
206
Summary of Contents for Virtual Storage Platform F400
Page 18: ......
Page 362: ...Glossary System Administrator Guide for VSP Gx00 models and VSP Fx00 models 362 ...
Page 367: ......