Hitachi Virtual Storage Platform F400 System Administrator Manual Download Page 342

Page: 342 / 368

Mode

Category

Description

Default

MCU/RCU

1093

Dynamic

Provisioning
Dynamic

Tiering
Thin Image

This SOM is used to disable background unmap

during microcode downgrade from a version that

supports pool reduction rate correction to a version

that does not support the function.

Mode 1093 = ON:

Background unmap cannot work.

Mode 1093 = OFF (default):

Background unmap can

work.

Note:

This SOM is applied when downgrading

microcode from a version that supports pool

reduction rate correction to a version that does not

support the function is disabled.

OFF

1097

Common

This SOM disables the warning LED to blink when

specific

SIMs are reported.

Mode 1097 = ON:

When SIM=452XXX, 462XXX,

3077XY, 4100XX, or 410100 is reported, the warning

LED does not blink.

Mode 1097 = OFF (default):

When SIM=452XXX,

462XXX, 3077XY, 4100XX, or 410100 is reported, the

warning LED blinks.

Note:

This SOM disables the warning LED to blink

when

specific

SIMs are reported.

OFF

System option modes

Appendix B: System option modes

System Administrator Guide for VSP Gx00 models and VSP Fx00 models

342

Summary of Contents for Virtual Storage Platform F400

















































































































































































































































































































































































Search results

Summary of Contents for Virtual Storage Platform F400

Reviews:

Hitachi Virtual Storage Platform F400, System Administrator Manual, Page: 342 / 368

Search results

Summary of Contents for Virtual Storage Platform F400

Reviews: