Hitachi Virtual Storage Platform F400 System Administrator Manual Download Page 279

Page: 279 / 368

Item

Content

Encryption

Encryption status of the parity group to which the PDEV belongs

■

Enabled: Encryption enabled

■

Disabled: Encryption disabled

Accelerated

Compression

Accelerated compression setting.

■

Enabled: accelerated compression is enabled.

■

Disabled: accelerated compression is disabled.

If the parity group with PDEV does not support accelerated compression,

or if the ECC Group is Spare Drive, a blank space is displayed.

Notes:

Blank if the parity group is not concatenated to another parity group or is Spare Drive.

PdevStatus.csv

This CSV

file

contains information about the status of physical devices (PDEVs). A record

is created for each PDEV.

Table 51 PdevStatus.csv

file

(Title: <<PDEV Status>>)

Item

Content

CR#

C# and R# (2-digit hexadecimal numbers), which identify the PDEV
Output in the format

, where:

■

: C#

■

: R#

Pdev Status

PDEV status

Port0 Status

Status of Port 0 on this PDEV

Port1 Status

Status of Port 1 on this PDEV

Pdev Location

Location name of this PDEV

Notes:

1=Normal, 0=Abnormal

PECBInfo.csv

This CSV

file

contains information about the PECB (PCIe channel board) and connecting

destination for VSP G800 or VSP F800.
For all other VSP Gx00 models or VSP Fx00 models, hyphens are displayed for all

contents.

PdevStatus.csv

Appendix A: Examples of storage

configuration

reports

System Administrator Guide for VSP Gx00 models and VSP Fx00 models

279

Summary of Contents for Virtual Storage Platform F400

















































































































































































































































































































































































Search results

Summary of Contents for Virtual Storage Platform F400

Reviews:

Hitachi Virtual Storage Platform F400, System Administrator Manual, Page: 279 / 368

Search results

Summary of Contents for Virtual Storage Platform F400

Reviews: