Mode
Category
Description
Default
MCU/RCU
721
Common
When a parity group is uninstalled or installed, the
following operation is performed according to the
setting of SOM 721.
Mode 721 = ON:
When a parity group is uninstalled
or installed, the LED of the drive for uninstallation is
not illuminated, and the instruction message for
removing the drive does not appear. Also, the
windows other than that of parity group, such as
DKA or DKU, are unavailable to select.
Mode 721 = OFF (default):
When a parity group is
uninstalled or installed, the operation is as before:
the LED of the drive is illuminated, and the drive
must be unmounted and remounted.
Notes:
1.
When the RAID level or emulation type is
changed for the existing parity group, this SOM
should be applied only if the drive mounted
position remains the same at the time of the
parity group uninstallation or installation.
2.
After the operation using this SOM is
completed, this SOM must be set back to OFF;
otherwise, the LED of the drive to be removed
will not be illuminated at subsequent parity
group uninstalling operations.
OFF
-
System option modes
Appendix B: System option modes
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
308
Summary of Contents for Virtual Storage Platform F400
Page 18: ......
Page 362: ...Glossary System Administrator Guide for VSP Gx00 models and VSP Fx00 models 362 ...
Page 367: ......