Mode
Category
Description
Default
MCU/RCU
937
Dynamic
Provisioning
Dynamic
Tiering
By setting this SOM to ON, HDT monitoring data is
collected even if the pool is a DP pool.
Mode 937 = ON:
HDT monitoring data is collected
even if the pool is a DP pool.
Only Manual execution mode and Period mode are
supported.
Mode 937 = OFF (default):
HDT monitoring data is
not collected if the pool is a DP pool
Notes:
1.
This SOM is applied when HDT monitoring data
collection is required in DP environment.
2.
When HDT is already used, do not set this SOM
to ON.
3.
For HDT monitoring data collection, shared
memory for HDT must be installed. For details,
contact customer support (see SOM937 sheet).
4.
If monitoring data collection is performed
without shared memory for HDT installed, an
error is reported and the monitoring data
collection fails.
5.
Before removing the shared memory for HDT,
set this SOM to OFF and wait for 30 minutes.
6.
Tier relocation with monitoring data collected
when this SOM is set to ON is disabled.
7.
When DP is converted into HDT (after purchase
of software license), the collected monitoring
data is discarded.
8.
Before downgrading the micro-program to an
unsupported version, set SOM 937 to OFF and
wait for at least 30 minutes.
OFF
-
System option modes
Appendix B: System option modes
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
331
Summary of Contents for Virtual Storage Platform F400
Page 18: ......
Page 362: ...Glossary System Administrator Guide for VSP Gx00 models and VSP Fx00 models 362 ...
Page 367: ......