Hitachi Virtual Storage Platform F400, System Administrator Manual

Page: 59 / 368

Port number key name Effects
User reference guide on
changing the SVP port
number
SLP You must change the SMI-S
port number to the same
number.
Hardware Reference Guide
for your storage system
SMIS_CIMOM You must change the SMI-S
port number to the same
number.
If the storage system is
83-03-01- XX /00 or later,
check the port number
which is used after
registering the storage
system. For detail, see
Viewing the port number
used in SVP (on page 57) .
Hardware Reference Guide
for your storage system
CommonJettyStart None None
CommonJettyStop None None
RestAPIServerStop None None
DeviceJettyStart None None
DeviceJettyStop None None
Changing the SVP port number
You can change the SVP port number to any arbitrary number. After changing the port
number, the SVP will be restarted.
Before you begin
■
Remote desktop connection from the management client to SVP has been performed.
■
The range of the available port number is from 1 to 65535. Make sure the new port
number is not duplicated with the number used in another application.
■
You can enter multiple instances of port-number-key-name and port-number . For
example:
MappSetPortEdit.bat MAPPWebServer 81 MAPPWebServerHttps 444
■
The management file of the SVP port number is stored in the following location:
path-to-tool \mpprt\cnf\mappsetportset.properties
Changing the SVP port number
Chapter 3: Configuring the storage system
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 59