Attribute
Description
Required /
Optional
Default
value
auth.radius.
server-
name
.secret
RADIUS secret key used for PAP or
CHAP authentication
Required
None
auth.radius.
server-
name
.retry.times
Retry times when the connection to
the RADIUS server fails.
Must be between 0 and 3. 0 means
no retry.
1
Optional
3
auth.radius.
server-
name
.attr.NASIdentifier
Identifier
for the RADIUS server to
find
SVP. Specify this value if the
attr.NAS-Identifier
attribute is used
in your RADIUS environment. ASCII
codes up to 253 bytes long are
accepted.
Optional
2
None
auth.radius.
server-
name
.attr.NAS-IPv4-
Address
IPv4 address of the SVP. Specify the
value of the NAS-IP-Address
attribute. This value is transmitted
to the RADIUS server when the
authentication is requested.
Optional
2
None
auth.radius.
server-
name
.attr.NAS-IPv6-
Address
IPv6 address of the SVP. Specify the
value of the NAS-IPv6-Address
attribute. This value is transmitted
to the RADIUS server when the
authentication is requested.
Optional
2
None
Notes:
1.
If the
specified
value is not applicable, the default value will be used.
2.
When NAS modules are installed, set
NAS-Identifier
,
NAS-IP-Address
, or
NAS-IPv6-Address
.
Table 6 RADIUS
definition
(for authorization server)
Attribute
Description
Required /
Optional
Default
value
auth.radius.
server-
name
.domain.name
A domain name that the LDAP
server manages. In this manual, the
value
specified
here is called
domain-name
hereafter.
Required
None
Creating a RADIUS
configuration
file
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
123
Summary of Contents for Virtual Storage Platform F400
Page 18: ......
Page 362: ...Glossary System Administrator Guide for VSP Gx00 models and VSP Fx00 models 362 ...
Page 367: ......
