Hitachi Virtual Storage Platform F400 System Administrator Manual Download Page 176

Page: 176 / 368

Field/Item

Description

Web

Application

Security

Settings

This section allows you to change web application security

settings.

Note:

Making any change in this section results in

the application being restarted immediately.

Enable HTTPS

Protocols

By default, all HTTPS protocols are enabled, and the boxes next

to the protocols are checked. Uncheck the check box next to a

protocol to change its state to disabled. Leave at least one

protocol enabled that your browser supports.

Enabled Cipher

Suites

By default, all cipher suites are enabled and are shown in the

Enabled Cipher Suites list box.

Disabled Cipher

Suites

To disable cipher suites, use the arrow to move selected cipher

suites to the Disabled Cipher Suites list box. Leave at least one

cipher suite enabled that your browser supports.

apply

Click

apply

to save your changes.

Optionally, to disable cipher suites, use the arrow to move enabled cipher suites

from the

Enabled Cipher Suites

list at the left to the

Disabled Cipher Suites

list at

the right. It is necessary to have at least one cipher suite remain enabled.

Note:

Take care before disabling cipher suites, because not all cipher

suites are supported by all browsers.

Optionally, to disable protocols, at

Enable HTTPS Protocols

, uncheck the check box

next to a protocol to change its state to disabled. It is necessary to have at least one

protocol remain enabled.

Note:

Take care before disabling HTTPS protocols, because not all HTTPS

protocols are supported by all browsers.

Click

apply

to save the currently

defined

security options.

Chapter 5: Setting up security

System Administrator Guide for VSP Gx00 models and VSP Fx00 models

176

Summary of Contents for Virtual Storage Platform F400

















































































































































































































































































































































































Search results

Summary of Contents for Virtual Storage Platform F400

Reviews:

Hitachi Virtual Storage Platform F400, System Administrator Manual, Page: 176 / 368

Search results

Summary of Contents for Virtual Storage Platform F400

Reviews: