Hitachi S10VE, User Manual

Page: 277 / 506

8. Tools
8-148
8.8 Error messages
This section lists the error messages and the action you need to take when you encounter them.
8.8.1 Common
Table 8-25 Common error messages (1/2)
No. Error message Action to take
1 Failed to read the file. (1) If the error occurs when BASE SYSTEM starts:
Check the
configData.xml
file in the same folder as
S10VEBASE.exe
(2) If the error occurs when you click Save in the Properties window:
Check the state of the file
C:¥S10VE¥
xxxx
¥projectData.xml
(where xxxx is the PCs
number)
(3) If the error occurs when displaying the Project List window:
Make sure that the xml file in (2) exists for all PCs numbers set in
the
C:¥ S10VE ¥sysPcsCnt.txt file (the first line in
sysPcsCnt.txt
is the number of PCs numbers, and the second
and subsequent lines are the PCs numbers themselves).
(4) If the error occurs in another situation:
Check the state of the specified file.
2 Failed to write the file. (1) If the error occurs when you click Save in the Properties window
with Use C-mode selected:
Make sure that you are able to write to the folder that contains the
S10VEBASE.exe
file.
(2) If the error occurs in another situation:
Check the state of the destination folder specified for the output
file.
3 Failed to create a file. Check the state of the destination folder specified for the output file.
4 File data is invalid. Check the contents of the specified file.
5 Failed to read the project list file. Check the state of the
C:¥ S10VE¥sysPcsCnt.txt
file.
6 Failed to write the project list file. Check the state of the
C:¥ S10VE¥sysPcsCnt.txt
file.
7 Failed to read the connection data file. Check the state of the
C:¥ S10VE¥
xxxx
¥connectData.xml
file
(where xxxx is the PCs number).
8 Failed to write the connection data file. Check the state of the
C:¥ S10VE¥
xxxx
¥connectData.xml
file
(where xxxx is the PCs number).
9 The project is not open. Repeat the operation with the project open.
10 Connected PCs has not been set. Set the communication type in the Change PCs window.
11 The CPMS has not been downloaded. Repeat the operation after downloading the CPMS.
12 Install the RPDP and use it. Install RPDP.
(Cont.)