Hitachi S10VE, User Manual

Page: 282 / 506

8. Tools
8-153
Table 8-32 Download CPMS window
No. Error message Action to take
1 The OSfile has not been loaded. Click CPMS Update in the Properties window.
2 The OS initial information file has not been loaded.
3
The LADDER initial information file 1 has not
been loaded.
4 The LADDER initial information file 2 has not
been loaded.
5 Cannot execute with SW STOP. Execute this
operation with SW RUN. Set the CPU RUN/STOP switch of the CPU module to
RUN and then perform the operation again.
6 Failed to read data.
Check the communication path (including cable
connection).
Module: xr_rrw_rrb_p
Error:
error-code
Check the communication paths. Also, check the error code
in Table 8-48. If the error code is unknown, contact the
system administrator.
7 Failed to transfer data. Check the error code in Table 8-48. If the error code is
unknown, contact the system administrator.
8 Failed to open the UDP communication socket. If there is no issue with the communication paths, contact
the system administrator.
9 Failed to close the UDP communication socket. If there is no issue with the communication paths, contact
the system administrator.
10 Failed in the CPU STOP processing.
Module: xr_rrw_stop
Error:
error-code
Check the communication paths. Also, check the error code
in Table 8-48. If the error code is unknown, contact the
system administrator.
11 Failed in the CPU reset start.
Module: xr_rrw_grstart
Error:
error-code
Check the communication paths. Also, check the error code
in Table 8-48. If the error code is unknown, contact the
system administrator.
12 Failed in the CPU reset start.
(option module is STOP) An option module is unable to transition to RUN mode.
Contact the system administrator.
13 Failed to save the ROM.
Module:
module-name
Error: error-code
Check the communication paths. Also, check the error code
in Table 8-48. If the error code is unknown, contact the
system administrator.
14 Failed to save the ROM.
(wait time over) The wait time for the ROM save operation has been
exceeded.
Contact the system administrator.
15 Failed to save the ROM.
(status error:
status )
The system is in an abnormal status.
Contact the system administrator.
16 Failed to invoke svupdatesiteos command. Check whether the
C:¥windows¥renix¥S10VE¥bin¥svupdatesiteo
s.exe
file exists.
If this file does not exist, you will need to install RPDP.
17 An error occurred in svupdatesiteos command.
Error: error-code Check the error code in Table 8-55. If the error code is
unknown, contact the system administrator.
18 Site update right is not provided. Perform the operation as the administrator, or as a user who
belongs to the
RPDPusers
group.