Hitachi S10VE, User Manual

Page: 168 / 506

8. Tools
8-39
- After writing to the PCs, the system displays a message that notifies you that the PCs will be reset and
asks for confirmation (Figure 8-40).
Figure 8-40 Reset confirmation message
Click OK to reset the PCs.
If you click Cancel , the PCs are not reset.
- If BASE SYSTEM successfully resets the PCs, it displays a message to that effect (Figure 8-41).
Figure 8-41 Reset successful message
- If the reset fails, the system displays a message reporting that the reset was not successful (Figure 8-
42).
Figure 8-42 Reset failed message
In this case, you will need to reset the PCs manually.
There are two ways to manually reset the PCs:
- Turn the CPU RUN/STOP switch from RUN to STOP and then back to RUN.
- Turn the PCs off and then on again.