Hitachi S10VE, User Manual

Page: 179 / 506

8. Tools
8-50
8.4.2.7 Project menu: End
Use this menu item to exit the application and output an operation log.
(1) From the main menu, select Project and then End .
(2) The confirmation message shown in Figure 8-56 might appear. If it appears, you might have clicked
Cancel when asked by BASE SYSTEM to confirm a reset that was required to apply settings to PCs.
Alternatively, you might have clicked OK but the reset failed.
Figure 8-56 Reset confirmation message (end)
Click OK to reset the PCs.
If you click Cancel , the PCs are not reset.
If the reset is successful, the system displays a message to that effect (Figure 8-33).
If the reset fails, the system displays a message reporting that the reset was not successful (Figure 8-
34).
(3) The system outputs an operation log.
For details about the contents of the operation log file, see 8.6.1 Operation history recording function .
The following error message appears if the logged-on user does not have permission to write to the
file:
Figure 8-57 Error message when user does not have operation log write permission
(4) Exit BASE SYSTEM.