Hitachi S10VE User Manual Download Page 197

Page: 197 / 506

8. Tools

8-68

8.4.3.4 Online menu: Backup, Restore, Backup save data comparison

Use these menu items to back up and restore data on PCs, and to compare backup data against the data on

the PCs.

For details about each of these functions, see

8.5 BACKUP RESTORE SYSTEM

8.4.3.5 Online menu: Remote Reset

Use this menu item to reset PCs.

Exercise caution when using the remote reset function. This function can reset PCs even if it is running a

ladder program.

(1) From the main menu, select

Online

and then

Remote Reset

(2) A message appears asking you to confirm that you want to reset the PCs.

Figure 8-80 Remote reset confirmation message

To reset the PCs, click

If you do not want to reset the PCs, click

Cancel

(3) If BASE SYSTEM successfully resets the PCs, it displays a message to that effect (Figure 8-33).

If the reset fails, BASE SYSTEM displays a message reporting that the reset was not successful

(Figure 8-34).

Summary of Contents for S10VE



























































































































































































































































































































































































































































































































Search results

Summary of Contents for S10VE

Reviews:

Related manuals for S10VE

Brands by name

Popular brands

Hitachi S10VE, User Manual

Search results

Summary of Contents for S10VE

Reviews:

Related manuals for S10VE

Brands by name

Popular brands