Hitachi S10VE, User Manual

Page: 68 / 506

3. Specifications
3-1
3. Specifications
Table 3-1 General specifications
Item Specification Remarks
E
n
v
ir
o
n
m
en
ta
l s
p
ec
if
ic
atio
n
s
Operating temperature
0 to 55°C Temperature variation of no
more than 10°C per hour
Storage temperature -20 to 75°C
Relative humidity
10 to 90% RH (whether operational or
non-operational) Condensation must be
strictly avoided.
Vibration resistance
Frequency of 10 to 150 Hz, acceleration
of 10 m/s
2
Sweep time of 8 minutes per cycle in the
X, Y, and Z directions
Number of sweep cycles: 20
JIS C 60068-2-6 compliant
The system must not be
installed in a location that is
subject to constant
vibration
#
.
Shock resistance
Peak acceleration of 147 m/s
2
Half sinusoidal impact wave time of 11
ms, three times each in X, Y, and Z
directions
JIS C 60068-2-27 compliant
Grounding Class D grounding with the ground
resistance of 100
Ω or less
Ambient air Dust: 0.1mg/m
3
or less
Corrosive gas JEITA IT-1004A Class B The environment must be
free of corrosive gas.
Altitude 1,000 m or below
Radioactivity -- The environment must be
free of radioactivity.
Cooling Natural-air cooling
W
eig
h
ts
Mount base (HSC-1770) 1,300 g or less
Power supply module (LQV410) 1000 g or less
CPU module (LQP600) 450 g or less
RI/O-IF module (LQE950) 320 g or less
OD.RING module (LQE510-E) 410 g or less
J.NET module (LQE540-E) 370 g or less
FL.NET module (LQE702-E) 275 g or less
D.NET module (LQE770-E) 330 g or less
ET.NET module (LQE260-E) 380 g or less
T
igh
te
n
in
g t
o
rq
u
e
Mount base mounting screws 1.5 N • m M5 screws
Module mounting screws
1.0 N • m M4 screws
Mount base FG terminal screws
Terminal block mounting screws
0.6 N
•
m M3 screws
Connecting screws
Mounting screws for power supply
module terminal block cover
#: When installing the system in a location that is subject to constant vibration, implement anti-vibration measures for
the control panel.