Hitachi S10VE, User Manual

Page: 84 / 506

5. Part Names and Functions
5-7
Table 5-5 Combination settings of the ET ST.No. (Ethernet station number setting) switch
No.
Setting value
Description
U L
1 F F The Ethernet ports operate using the following fixed IP addresses:
CH1:
192.192.192.1
CH2:
192.192.193.1
2 Other than the
above The Ethernet ports operate using the IP addresses you have set.
For details about how to set IP addresses, see
8.4.2.5 Network configuration .
(5) LED specifications
Table 5-6 LED specifications
Name Color Specification
RUN Green
An LED that indicates the operating status of the ladder program.
This LED is lit when the ladder program is running.
ALARM Red
An LED that indicates that an issue of some kind has occurred. This might be a drop in the
capacity of the primary battery, an issue with an option module, or a minor failure (including
both major and minor failures of option modules).
ERR Red
An LED that indicates the major failure status of the system. This LED is lit when a major
failure has occurred.
STBY Green
An LED indicating whether the CPU is in a standby state.
This LED is lit when the CPU is in a standby state.
LINK1 Green
An LED indicating the status of the physical connection between the ET1 port and its peer.
This LED is lit when a physical link is established.
LINK2 Green
An LED indicating the status of the physical connection between the ET2 port and its peer.
This LED is lit when a physical link is established.
ACT1 Green This LED is lit when data is being transferred between the ET1 port and its peer.
ACT2 Green This LED is lit when data is being transferred between the ET2 port and its peer.
For details about the operating status of the CPU unit that each combination of LEDs represents, see Chapter 11.
Operation .