Hioki SW9001, Instruction Manual

Page: 13 / 170

9
Parts Names and Functions
Rear
The illustration shown here is for the SW1001.
1 1
66 77 88 99
33
2 2
4 4
5 5
10 10
11 11
No. Name Description Reference
1 1
Power switch Turns on/off the power. p. 23
2 2
Power inlet
Used to connect the provided power cord. p. 23
3 3
EXT. I/O terminal Used to connect the device to be externally controlled. p. 51
4 4
EXT. I/O MODE
change-over switch
Left: Sinking current (NPN), Right: Sourcing current (PNP) p. 50
5 5
Communication
setting mode switch
Perform communication using fixed settings when the
communication settings are unknown.
p. 22
6 6
USB connector
Used to connect the PC. p. 64
7 7
HOST
RS-232C connector
Used to connect the PC. p. 66
8 8
INSTRUMENT
RS-232C connector
Used to connect the RS-232C connector of the instrument for
scan measurement.
p. 70
9 9
LAN connector Used to connect the PC. p. 60
10 10
Serial number
The serial number consists of 9 digits. The first two (from
the left) indicate the year of manufacture, and the next two
indicate the month of manufacture.
Required for production control. Do not peel off the label.
–
11 11
MAC address MAC address of the LAN. p. 105
1
Overview
HIOKI SW1001A961-04