manualshive.com logo in svg

Hioki SW9001, Instruction Manual

Share
Download
Hioki SW9001 Instruction Manual Download Page 75

71

Communication Method

8.7  Communication Method

Various messages are supported for controlling the device through the interfaces.

Messages can be either program messages, sent from the PC to the device, or response 

messages, sent from the device to the PC.

Message

Program messages

Response message

Command message

Query message

Message types are further categorized as follows.

Program messages

Response message

This device

PC

Message format

Program messages

Program messages can be either command messages or query messages.

(1)  Command messages

Instructions to control the instrument, such as to change or reset the instrument settings.

Example:

Instruction to set the range

:ROUT:CLOSE 101

Header portion

Space

Data format

(2)  Query messages

Requests for responses relating to results of operation or measurement, or the state of device 

settings

Example:

Request for the present measurement range

:ROUT:CLOSE?

Header portion

Question mark

See: "Headers" (p.  72), "Separators" (p.  73), and "Data formats" (p.  74)

8

Communication Function

HIOKI SW1001A961-04

 

Summary of Contents for SW9001











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands