Hioki SW9001, Instruction Manual

Page: 99 / 170

95
Message Reference
Query Condition Register of Status Query Register Group
Syntax
Query
:STATus:QUEStionable:CONDition?
Response <0 to 65535 (NR1)>
Description Returns the present status query register value. Unused bits (indicated in the following
chart by “–”) return the value 0.
bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8
– – – – – – –
INFO_
ERR
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
BACKUP
_ERR
– – – – – – –
Example
:STAT:QUES:COND?
128
Backup error is occuring.
Note • The present status is returned when this command is received.
•Unlike
:STATus:QUEStionable:EVENt?
, :
STATus:QUEStionalbe?
, bit information
is not retained.
Query Event Register of Status Query Register Group
Syntax Query
:STATus:QUEStionable[:EVENt]?
Response <0 to 65535 (NR1)>
Description
Returns the retained status query register value. Unused bits (indicated in the following
chart by “–”) return the value 0.
bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8
– – – – – – –
INFO_
ERR
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
BACKUP
_ERR
– – – – – – –
Example
:STAT:QUES?
256
A hardware information error has occurred.
Note • When an event occurs, 1 is set for the bit corresponding to each event and retained.
•The bit is not cleared until
*CLS
or this query is executed or the power is turned on again.
Set and query Enable Register of Status Query Register Group
Syntax Command
:STATus:QUEStionable:ENABle <0
–
65535(NR1)>
Query
:STATus:QUEStionable:ENABle?
Response <0 to 65535 (NR1)>
Description Sets the standard operation register mask pattern to a value from 0 to 65535. The value
when the device is turned on is 0. When issued as a query, unused bits are always set to 0.
bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8
– – – – – – –
INFO_
ERR
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
BACKUP
_ERR
– – – – – – –
Note The initial value when the power is turned on is 0.
8
Communication Function
HIOKI SW1001A961-04