Hioki SW9001, Instruction Manual

Page: 108 / 170

104
Message Reference
Set and query IP address
Syntax
Command
:SYSTem:COMMunicate:LAN:IPADdress <Value 1>,<Value
2>,<Value 3>,<Value 4>
Query
:SYSTem:COMMunicate:LAN:IPADdress?
Response <Value 1>,<Value 2>,<Value 3>,<Value 4>
<Value 1> = 0 to 255 (NR1)
<Value 2> = 0 to 255 (NR1)
<Value 3> = 0 to 255 (NR1)
<Value 4> = 0 to 255 (NR1)
<Value 1> to <Value 4> indicate the IP address.
Description Set the IP address for the device.
The setting is enabled after
:SYSTem:COMMunicate:LAN:UPDate
(or restart) is executed.
When the communication setting mode switch ( DFLT / USER ) is set to DFLT , the address
is fixed to 192.168.0.254 regardless of the settings specified here.
The query returns the set value regardless of the communication setting mode switch state.
When the LAN function is set to off, 0,0,0,0 is returned.
Example
SYST:COMM:LAN:IPAD 192,168,0,2
SYST:COMM:LAN:UPD
SYST:COMM:LAN:IPAD?
192,168,0,2
Note • When connecting to the existing network, specify the LAN settings via USB or RS-232C
in advance. If a wrong IP address or overlapping IP address is used, a problem may
arise with the existing network.
• An execution error occurs during scan operation (command).
Set and query subnet mask
Syntax Command
:SYSTem:COMMunicate:LAN:SMASK <Value 1>,<Value 2>,
<Value 3>,<Value 4>
Query
:SYSTem:COMMunicate:LAN:SMASk?
Response <Value 1>,<Value 2>,<Value 3>,<Value 4>
<Value 1> = 0 to 255 (NR1)
<Value 2> = 0 to 255 (NR1)
<Value 3> = 0 to 255 (NR1)
<Value 4> = 0 to 255 (NR1)
<Value 1> to <Value 4> indicate the mask value.
Description Set the LAN subnet mask.
The setting is enabled after
:SYSTem:COMMunicate:LAN:UPDate
(or restart) is executed.
When the communication setting mode switch ( DFLT / USER ) is set to DFLT , the address
is fixed to 255.255.255.0 regardless of the settings specified here.
The query returns the set value regardless of the communication setting mode switch state.
Example
SYST:COMM:LAN:SMAS 255,255,255,0
SYST:COMM:LAN:UPD
SYST:COMM:LAN:IPAD?
255,255,255,0
Note An execution error occurs during scan operation (command).
HIOKI SW1001A961-04