Hioki SW9001, Instruction Manual

Page: 109 / 170

105
Message Reference
Apply LAN settings
Syntax
Command
:SYSTem:COMMunicate:LAN:UPDate
Description Update and apply the LAN settings.
When the communication setting mode switch ( DFLT / USER ) is set to DFLT , no operation
is performed.
Any active connection via LAN is interrupted.
Example
:SYST:COMM:LAN:IPAD 192,168,1,100
:SYST:COMM:LAN:SMAS 255,255,255,0
:SYST:COMM:LAN:GAT 0,0,0,0
:SYST:COMM:LAN:CONT 23
:SYST:COMM:LAN:UPD
For LAN-related settings, the IP address is set to 192.168.1.100, port No. 23, and gateway
OFF and the settings are applied.
Note An execution error occurs during scan operation (command).
Query MAC address
Syntax Query
:SYSTem:COMMunicate:LAN:MAC?
Response <MAC address>
Description Returns the MAC address of the device.
Example
SYST:COMM:LAN:MAC?
"00-01-67-00-00-00"
(10) System information
Backing up settings
Syntax Command
:SYSTem:BACKup
Description Stores the hardware settings in the device’s internal non-volatile memory. Settings will be
retained even when the power is turned off.
Note • The non-volatile memory can be rewritten about 100,000 times. Avoid frequent use of
this command.
• An execution error occurs during scan operation (command).
Query slot module information
Syntax
Query
:SYSTem:CTYPe? <
Slot No.
>
Response <Manufacturer name>,<Model name>,<Serial No.>
<Slot No.> = 1 to 3 (NR1) (SW1001)
1 to 12 (NR1) (SW1002)
<Manufacturer name> = HIOKI
0 (Not attached)
<Model name> = SW9001 (SW9001)
SW9002 (SW9002)
0 (Not attached)
<Serial No.> = Serial No. (NR1)
Description Returns the module information of the specified slot.
Example
:SYSTem:CTYPe? 1
HIOKI,SW9001,180612345
8
Communication Function
HIOKI SW1001A961-04