HIKVISION DS-7200, User Manual

Page: 81 / 227

User Manual of DS-7200/7300/8100 Series DVR
81
(Event) :
Stream Type: Set the stream type to be Video or Video & Audio.
Resolution: Set recording at resolution of WD1, 4CIF, 2CIF, CIF or QCIF.
Bitrate Type: Set the bitrate type to be Variable or Constant.
Video Quality: Set the video quality of recording, with 6 levels configurable.
 The WD1 resolution is supported by DS-7204HWI-SV, DS-7224/7232HVI-SH,
DS-7200HWI-SH, DS-7200HVI-SV, DS-7200HWI-SL, DS-7200HWI-E1(2)/C,
DS-7200HWI-E1(2)/C/F, DS-7200HWI-E1/E2; DS-7300HWI-SH, DS-7300HI-SH,
DS-7300HWI-E4/C; DS-81000HWI-E4 (8) /C, DS-8100HCI-SH and DS-8100HWSI-SH
models.

The Stream Type, Resolution, Bitrate Type and Video Quality are not configurable for the
Main Stream (Event) of the IP Camera.

The selectable resolution for the IP camera is determined by the camera type (please refer to
the Appendix List of Compatible Hikvision IP Cameras ); up to 720P resolution is supported by
4-ch HDVR and 1080P resolution by 8-ch/16-ch HDVR.
Frame Rate: Set the frame rate of recording.
Max. Bitrate Mode: Set the mode to General or Customize (32-3072Kbps).
Max Bitrate (Kbps): Select or customize the maximum bit rate for recording.
Max. Bitrate Range Recommended: A recommended Max. bitrate range is provided for
reference.
4) Configure the pre-record, post-record time, expired time, redundant record (this option is only
available when the HDD mode is Group ) and whether you want to record audio.
Pre-record: The time you set to record before the scheduled time or event. For example, when an
alarm triggered the recording at 10:00, if you set the pre-record time as 5 seconds, the camera
records it at 9:59:55.
Post-record: The time you set to record after the event or the scheduled time. For example, when
an alarm triggered the recording ends at 11:00, if you set the post-record time as 5 seconds, it
records till 11:00:05.
Expired Time (day): The expired time is the longest time for a record file to be kept in the HDD,
if the deadline is reached, the file will be deleted. You can set the expired time to 0, and then the
file will not be deleted. The actual keeping time for the file should be determined by the capacity
of the HDD.
Redundant Record: Enabling redundant record means you save the record files in the redundant
HDD. See Chapter 5.7 Configuring Redundant Record .

The Redundant Record option is only available when the HDD mode is Group.

The redundant record is used when you want to save the record files in the redundant HDD.
You must configure the redundant HDD in HDD settings. For detailed information, see
Chapter 10.3.2 Setting HDD Property .
Record Audio: Check the checkbox to record the sound, or uncheck to record the image without
sound.