HIKVISION DS-7200 User Manual Download Page 116

Page: 116 / 227

User Manual of DS-7200/7300/8100 Series DVR

116



Playback progress bar: use the mouse to click any point of the progress bar or drag the progress bar to

locate special frames.



About video type bar:

represents normal recording (manual or schedule);

represents event

recording;

represents smart search recording.

6.1.5

Playing Back by Smart Search

Purpose:

The smart playback function provides an easy way to get through the less effective information. When you

select the smart playback mode, the system will analyze the video containing motion or VCA information, and

mark it with green color on the playback process bar. The filtering rule of record files and playback speed for

the non-related and related video can be configured on your demand.

The playback by smart search is not supported for IP cameras.

Steps:

Enter the Smart Playback interface.

Select a camera in the camera list and select a date in the calendar and click the

button to play.

Click the

on the toolbar to enter Smart Search mode. The smart search toolbar appears at the

bottom of the screen.

Figure 6. 14

Draw Area for Smart Search (1)

Summary of Contents for DS-7200




































































































































































































































Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands

HIKVISION DS-7200, User Manual

Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands