HIKVISION DS-7200 User Manual Download Page 10

Page: 10 / 227

User Manual of DS-7200/7300/8100 Series DVR



Support alarm push notification (live video or playback) on the linked mobile phones when

alarm event occurs.

The mobile phone must be installed with the iVMS-4500 client software and the alarm push function is

enabled.

Other Local Functions



Operable by mouse, IR remote control or front panel (for DS-7300 and DS-8100).



Three-level user management; admin user is allowed to create many operating accounts and

define their operating permission, which includes the limit to access any channel.



Operation, exceptions and log recording and searching.



Import and export of device configuration information.

Network Functions



1 self-adaptive 10M/100M network interface for DS-7204/7208/7216, and 1 self-adaptive

10M/100M/1000M network interface for DS-7224/7232 and DS-7300, and 2 self-adaptive

10M/100M/1000M network interfaces for DS-8100 models.



IPv6 is supported.



TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, RTSP, NTP, SADP, SMTP, SNMP, NFS, ONVIF

and iSCSI are supported.



Extranet access by HiDDNS.



Support access by EZVIZ Cloud P2P.



TCP, UDP and RTP for unicast.



Auto/Manual port mapping and automatically discovered by NAT.



DS-7200HWI-E1(2)/C,

DS-7200HWI-E1(2)/C/F,

DS-7300HWI-E4/C

and

DS-8100HWI-E4(8)/C series support HIKVISION-C and PELCO-C Coaxitron protocols.



Remote search, playback, download, locking and unlocking of the record files, and downloading

files broken transfer resume.



Remote parameters setup; remote import/export of device parameters.



Remote viewing of the device status, system logs and alarm status.



Remote locking and unlocking of control panel and mouse.



Remote HDD formatting and program upgrading.



Remote system restart.



RS-232 and RS-485 transparent channel transmission.

RS-232 serial port is provided for DS-7300 and DS-8100 models only.



Alarm event and exception information can be sent to the remote host.



Remotely start/stop recording.



Upgrade by remote FTP server.



Remote PTZ control.



Two-way audio and voice broadcasting.



Embedded WEB server.

Development Scalability:



SDK for Windows and Linux system.



Source code of application software for demo.



Development support and training for application system.

Summary of Contents for DS-7200




































































































































































































































Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands

HIKVISION DS-7200, User Manual

Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands