HIKVISION DS-7200 User Manual Download Page 48

Page: 48 / 227

User Manual of DS-7200/7300/8100 Series DVR

3.2

Operations in Live View Mode

In live view mode, the following functions can be realized:

•

Single Screen

: showing only one screen on the monitor.

•

Multi-screen:

showing multiple screens on the monitor simultaneously.

•

Auto-switch:

the screen is auto switched to the next one. And you must set the dwell time for each

screen on the configuration menu before enabling the auto-switch.

Menu>Configuration>Live View>Dwell Time.

•

Playback

: play back the recorded videos for current day.

•

Start Recording

: start all-day normal recording or motion detection recording for all channels.

•

Aux/Main Output Switch:

the DVR will check the connection of the output interfaces to define the

main and auxiliary output interfaces. When both HDMI and VGA are connected, or either one is

connected, the CVBS output is used as the auxiliary video output for live view, recording and PTZ

controls; When both HDMI and VGA are not connected, the CVBS output is used as the main video

output for live view playback, recording, PTZ control and menu operations.

When the aux output is enabled, you can do some basic operation on the live view mode for the Aux output,

while no operation is allowed for the main output.

3.2.1

Front Panel Operation

For the DS-7300 and DS-8100 models,

you can operate the front panel buttons to realize the following

functions in live view:

Table 3. 2

Front Panel Operation in Live View

Functions

Front Panel Operation

Show single screen

Press the corresponding Alphanumeric button. E.g. Press 2 to display only the

screen for channel 2.

Show multi-screen

Press the PREV/FOCUS- button.

Manually

switch

screens

Next screen: right direction button.

Previous screen: left direction button.

Auto-switch

Press

Enter

button.

All-day playback

Press

Play

button.

Switch main and aux

output

Press

button and

Enter

button.

3.2.2

Using the Mouse in Live View

In the live view mode, use the mouse to right-click on the window to access the following menu:

Summary of Contents for DS-7200




































































































































































































































Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands

HIKVISION DS-7200, User Manual

Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands