HIKVISION DS-7200 User Manual Download Page 123

Page: 123 / 227

User Manual of DS-7200/7300/8100 Series DVR

123

Select the camera from the dropdown list.

The face detection is supported by the analog cameras 01~02 only.

Figure 6. 23

Face Search Interface

Specify the start time and end time for search the captured pictures.

Click

Search

to start searching. The search results of face detection pictures are displayed in the list.

Figure 6. 24

Face Search Results

Play the face picture related video file.

You can double click on a face picture to play its related video file in the view window on the top right,

or select a picture item and click

to play it.

You can also click

to stop the playing, or click

to play the previous/next file.

If you want to export the captured face pictures to local storage device, connect the storage device to the

device and click

Export All

to enter the Export interface.

Click

Export

to export all face pictures to the storage device.

Please refer to

Chapter 7 Backup

for the operation of exporting files.

Summary of Contents for DS-7200




































































































































































































































Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands

HIKVISION DS-7200, User Manual

Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands