HIKVISION DS-7200 User Manual Download Page 8

Page: 8 / 227

User Manual of DS-7200/7300/8100 Series DVR

Product Key Features

General



Connectable to the network cameras and network domes (this feature is supported by HDVR

series).



Connectable to the Coaxitron camera/dome for DS-7200HWI-E1(2)/C, DS-7200HWI-E1(2)/C/F,

DS-7300HWI-E4/C and DS-8100HWI-E4(8)/C series.



PAL/NTSC adaptive video inputs.



H.264 video compression with high reliability and superior definition.



Encoding at up to 4CIF resolution for DS-7204/7208/7216HVI-SH, DS-7200HFI-SH,

DS-7300HFI-SH, and DS-8100HFSI-SH models; and up to WD1 (PAL: 960×576, NTSC:

960×480) resolution for other models.



Each channel supports dual-stream.



Independent configuration for each channel, including resolution, frame rate, bit rate, image

quality, etc.



Input and output video quality is configurable.



Normal and event recording parameters configurable per individual camera.



Encoding for audio/video composite stream or video stream; audio and video synchronization

during composite stream encoding.



Watermark technology.



Video quality diagnostics.

Local Monitoring



Simultaneous HDMI/VGA and CVBS outputs.



HDMI/VGA output at up to 1920×1080P resolution.



1/4/6/8/9/16/25/36-division live view is supported, and the display sequence of screens is

adjustable.



Manual or auto switch of cameras in live view, with the dwell time is configurable.



Quick setting menu is provided for live view.



The selected live view channel can be shielded.



Motion detection, video tampering, video exception, video loss and VCA alarm functions.

The VCA alarm type is supported by the Smart DVR/HDVR models only.



Privacy mask.



Multiple PTZ protocols supported; setting and calling of PTZ preset, patrol and pattern.



Zooming in by clicking the mouse and PTZ tracing by dragging mouse.

HDD Management



1 SATA hard disk can be connected to DS-7200HVI-SH, DS-7200HVI-SV, DS-7204HFI-SH,

DS-7204HWI-SV

and

DS-7204HWI-SH,

DS-7200HWI-SL,

DS-7200HWI-E1,

DS-7204HWI-E1/C, DS-7204HWI-E1/C/F models, 2 SATA hard disks to DS-7208/7216HFI-SH,

DS-7208/7216HWI-SH,

DS-7208/7216HWI-E2/C,

DS-7208/7216HWI-E2/C/F,

DS-7208/7216/7224HWI-E2, DS-7224/7232HVI-SH and DS-7224/7232HWI-SH models, up to

4 SATA hard disks to DS-7300 and DS-8104HWI-E4/C, and up to 8 SATA hard disks to

DS-8100-SH, DS-8108HWI-E8/C and DS-8116HWI-E8/C; with a maximum of 4TB storage

capacity for each disk.



8 network disks (8 NAS disks, or 7 NAS disks+1 IP SAN

disk) can be connected.

Summary of Contents for DS-7200




































































































































































































































Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands

HIKVISION DS-7200, User Manual

Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands