HIKVISION DS-7200 User Manual Download Page 205

Page: 205 / 227

User Manual of DS-7200/7300/8100 Series DVR

205

If you want to export the log files, click the

Export

button to enter the Export menu.

You can also export all the log files stored in the HDD.

(1)

Enter the Log Export interface.

Menu > Maintenance > Log Information>Log Export

Figure 12. 5

Log Export Interface

(2)

Check

checkbox to select the HDD and click

Export

to enter the export interface.

Figure 12. 6

Export Log Files

Select the backup device from the dropdown list of

Device Name

Click the

Export

to export the log files to the selected backup device.

You can click the

New Folder

button to create new folder in the backup device, or click the

Format

button

to format the backup device before log export.



Please connect the backup device to device before operating log export.



The log files exported to the backup device are named by exporting time, e.g.,

20110514124841logBack.txt

12.3

Importing/Exporting Configuration Files

Purpose:

The configuration files of the device can be exported to local device for backup; and the configuration files of one

Summary of Contents for DS-7200




































































































































































































































Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands

HIKVISION DS-7200, User Manual

Search results

Summary of Contents for DS-7200

Reviews:

Related manuals for DS-7200

Brands by name

Popular brands